Printed from sizebench.com/battery-charge-time-calculator
For estimating and educational purposes only. Results are approximate and are not a substitute for a licensed professional, the manufacturer's instructions or your local code. Disclaimer
Embed this calculator on your site
Free for any website or blog. Copy the code below and paste it into an HTML block. Keep the credit link.
Divide the amp-hours you need to put back by the charger's current, then allow for charging losses. Lithium batteries are about 95% efficient and accept full current almost to the top. Lead-acid batteries lose more energy and slow down in the absorption stage.
Ah to add = Capacity × (Target % − Start %)
Time (h) = Ah to add ÷ (Charger amps × Efficiency)
Example: 100 Ah LiFePO4 from 20% with a 20 A charger
80 Ah ÷ (20 A × 0.95) = 4.2 hours.
Recommended charge rates
Type
Typical charge current
100 Ah example
LiFePO4
0.2–0.5 C
20–50 A
AGM
0.1–0.25 C
10–25 A
Flooded lead-acid
0.1–0.13 C
10–13 A
Always follow the battery manufacturer's maximum charge current and voltage.
Frequently asked questions
How long does it take to charge a 100Ah battery?
About 4–5 hours with a 20 A charger from 20% for lithium; closer to 6–8 hours for lead-acid because of the slow absorption stage.
Can I charge faster with a bigger charger?
Up to the battery's rated charge current. Charging above it shortens battery life and can be unsafe.
How do I charge from solar?
Use the charge controller's output current as the charger current, averaged over the day's sun hours.