How Much Is Your Scrap Cable Worth?

Enter the cable type, the weight or length of your lot and its copper content. We pull today's LME copper price and show the recoverable copper, the lot value and the value per kg of cable, with every step of the math.

Free, no sign-upInstant resultsUpdated October 2026

Quotes

US$/t
Illustrative example value, not today's quote
per US$
Illustrative example value, not today's quote
%
Starts at 95%: change it to what your buyer actually pays.

Your cable lot

Fills in weight and copper content when known. Always editable.
mm
Diameter in mm (e.g. 0.5), not cross-section.
mm²
Area in mm² (e.g. 2.5), not diameter.
Conductor
Conductor material

Tinned copper usually sells for less than bare copper: use the % your buyer pays for tinned copper.

Not solid copper. Enter the copper content measured on a sample or stated by the manufacturer; the gauge estimate does not apply.

Quantity
kg
Without reel or packaging.
m
kg/m
Weigh 1 m of cable. Required by length; by weight it only feeds the gauge estimate.
%
% of the whole cable mass.
%
Applied to the contained copper only. No universal value.
Estimated lot value
–
How we calculated this

    For estimating and educational purposes only. Results are approximate and are not a substitute for a licensed professional, the manufacturer's instructions or your local code. Disclaimer

    Embed this calculator on your site

    Free for any website or blog. Copy the code below and paste it into an HTML block. Keep the credit link.

    Old electrical switches and boxes ready for salvage
    Old electrical switches and boxes ready for salvagePhoto: Jonathan Lim / Unsplash

    How the calculator works

    A scrap cable lot is worth what its copper sells for. The calculator follows the same chain a buyer uses: how much cable you have, how much of that mass is copper, how much copper survives stripping or granulation, and how much you are paid per kilogram of copper. The copper price is the LME copper price in US dollars per tonne, converted to your currency and multiplied by the percentage of LME your buyer pays.

    The LME price fills in automatically from the latest published quote (LME via Shock Metais), with its date shown next to the field. The exchange rate starts at 1 (US dollars); type your local rate to see the result in your currency. Every field stays editable, and if the quote cannot be loaded the field is left empty for you to fill in: the calculator never shows a made-up number as today's price.

    Formulas

    Cable mass (kg) = weight in kg or metres × cable kg/m Contained copper (kg) = cable mass × copper content % Recoverable copper = contained copper × (1 − loss %) Effective yield % = copper content % × (1 − loss %) Reference (per kg) = LME (US$/t) × exchange rate ÷ 1,000 Copper price (per kg) = reference × % of LME paid Lot value = recoverable copper × copper price Value per kg of cable = lot value ÷ cable mass

    The loss is applied once, to the contained copper only. Percentages are divided by 100 and rounding happens only on screen.

    Worked example (illustrative numbers)

    These are round numbers chosen to show the math, not market prices or real cable data: 1,000 kg of cable, 60% copper content, 3% processing loss, LME at US$ 10,000/t, an exchange rate of 5.00 local-currency units per dollar and 90% of LME paid.

    • Contained copper: 1,000 × 60% = 600 kg
    • Recoverable copper: 600 × 0.97 = 582 kg (effective yield 58.2%)
    • Reference: 10,000 × 5.00 ÷ 1,000 = 50.00 per kg of copper; at 90% that is 45.00 per kg
    • Lot value: 582 × 45.00 = 26,190.00, or 26.19 per kg of cable

    Copper content: measure it if you can

    The copper content is the number that moves the result most, and it varies a lot with insulation, sheath, armour, fillers and the number of conductors. The reliable way to get it is a sample: weigh a length of cable, strip it, weigh the clean copper and divide. Your buyer will normally do the same before paying.

    If you know the conductor size, the calculator can also estimate the theoretical copper per metre from physics: conductor area × number of conductors × copper density (8.89 g/cm³), so each mm² of copper weighs 0.00889 kg per metre.

    • Power cable: mm² × number of cores × 0.00889. A 3 × 2.5 mm² cable holds 0.0667 kg (66.7 g) of copper per metre. If a weighed metre of that cable came to 0.150 kg (a hypothetical figure), the estimated content would be 0.0667 ÷ 0.150 = 44.5%.
    • Telephone cable: each conductor is π × d² ÷ 4 with the diameter d in mm, two conductors per pair. 50 pairs of 0.5 mm conductors: 0.1746 kg/m.
    • UTP: d = 0.127 × 92(36 − AWG)/39 mm, eight conductors. 24 AWG gives d ≈ 0.511 mm and about 14.6 g of copper per metre.

    This is an estimate. Twisted pairs contain a little more conductor than one metre per metre of cable, and the real cross-section of many cables is below the nominal one. Do not mix up the conductor diameter in mm with the cross-section in mm². For CCA (copper-clad aluminium) and CCS (copper-clad steel) there is no gauge estimate: the copper is only a thin layer, so use a measured or declared content. Tinned copper usually sells below bare copper, so use the % your buyer pays for it.

    What the result is not

    The result is the sale value of the recovered copper before costs. It is not profit and not a maximum purchase price: freight, stripping or granulation, labour, taxes and the buyer's margin all come out of it. Treat it as an estimate to be confirmed with a sample of the actual lot.

    Frequently asked questions

    Where does the LME copper price come from?

    From the latest quote published by sucatabrasil.com.br (LME via Shock Metais), shown with its date. You can overwrite it at any time; the label then changes to "entered manually". If the quote cannot be loaded, the field stays empty for you to fill in.

    What percentage of the LME do scrap buyers pay?

    There is no universal figure: it depends on the cable type, the quantity, the market and the buyer. Ask for a quote and enter the percentage you are actually offered; the calculator starts at 95% and you can change it.

    How do I find the copper content of my cable?

    Weigh a sample, strip it, weigh the copper and divide. If you know the conductor size and the cable weight per metre, the calculator can estimate it from the gauge, but treat that as an estimate.

    Can I use the gauge estimate for CCA or CCS cable?

    No. Copper-clad aluminium and copper-clad steel only have a thin copper layer, so the geometry would grossly overstate the copper. Enter a measured content or the manufacturer's figure.

    Is the lot value my profit?

    No. It is the sale value of the recovered copper before freight, processing, taxes and the buyer's margin, and it must be confirmed with a sample of the lot.