Propeller Slip Calculator

Check how efficiently your prop turns RPM into speed, or estimate speed for a different pitch.

Free, no sign-upInstant resultsUpdated October 2026
Calculate
rpm
: 1
Outboards: usually 1.75–2.33
%
Speed in
Propeller slip
–
How we calculated this

    For estimating and educational purposes only. Results are approximate and are not a substitute for a licensed professional, the manufacturer's instructions or your local code. Disclaimer

    Embed this calculator on your site

    Free for any website or blog. Copy the code below and paste it into an HTML block. Keep the credit link.

    Large bronze ship propeller by a marina
    Large bronze ship propeller by a marinaPhoto: Margo Evardson / Unsplash

    What is propeller slip?

    Pitch is how far a propeller would move forward in one turn if it were screwing through a solid. In water it moves less. Slip is the percentage difference between that theoretical distance and the boat's real speed.

    Theoretical mph = (RPM ÷ Gear ratio) × Pitch ÷ 1,056 Theoretical knots = (RPM ÷ Gear ratio) × Pitch ÷ 1,215 Slip % = (Theoretical − Actual) ÷ Theoretical × 100

    Example

    5,500 RPM, 2.0:1 gearcase, 19 in pitch: (5,500 ÷ 2) × 19 ÷ 1,056 = 49.5 mph theoretical. At 38 mph on GPS, slip is (49.5 − 38) ÷ 49.5 = 23%, which is high and worth checking.

    Normal slip ranges

    Boat typeTypical slip
    Performance boats, bass boats5–10%
    Runabouts, center consoles10–15%
    Pontoons15–25%
    Heavy cruisers, workboats20–30%

    Choosing pitch

    Your engine should reach the top of its recommended wide-open-throttle RPM range. Each inch of pitch changes WOT RPM by about 150–200 RPM: lower pitch raises RPM, higher pitch lowers it.

    Frequently asked questions

    What causes high prop slip?

    A prop that is too small or damaged, ventilation, an engine mounted too high, a spun hub, or a heavily loaded boat.

    Can prop slip be negative?

    No. A negative number means one of the inputs is off, usually the gear ratio or a speedometer reading instead of GPS.

    Where do I find my gear ratio?

    In the engine's owner's manual or spec sheet. Many 150–300 hp outboards use about 1.75:1 to 2.0:1.