Home ›3D Printing ›Filament m ↔ g ›3D Printer Filament Chart
3D Printer Filament Chart: Density, Meters per kg & Temperatures
Answer
PLA 335 m · PETG 327 m · ABS 400 m
Meters per 1 kg spool of 1.75 mm filament. Lighter plastics like ABS give you more length per kilogram than dense ones like PETG.
Free, no sign-up Instant results Updated October 2026
3D Printer Filament Chart Material Density g/m (1.75) m/kg (1.75) m/kg (2.85) Nozzle Bed PLA 1.24 g/cm³ 2.98 335 m 126 m 190–220 °C 50–60 °C PETG 1.27 g/cm³ 3.05 327 m 123 m 230–250 °C 70–85 °C ABS 1.04 g/cm³ 2.50 400 m 151 m 230–260 °C 95–110 °C ASA 1.07 g/cm³ 2.57 389 m 146 m 240–260 °C 90–110 °C TPU 1.21 g/cm³ 2.91 344 m 130 m 210–230 °C 30–60 °C Nylon 1.14 g/cm³ 2.74 365 m 138 m 240–270 °C 70–90 °C PC 1.20 g/cm³ 2.89 346 m 131 m 260–300 °C 100–120 °C
Temperatures are typical starting ranges; follow the values printed on your spool.
Print this chart
Copy result
Share link Save PDF / print Reset
How we calculated this
Was this calculator helpful? Yes No Thanks for the feedback!
See details ↓
Printed from sizebench.com/filament-length-to-weight-calculator
For estimating and educational purposes only. Results are approximate and are not a substitute for a licensed professional, the manufacturer's instructions or your local code. Disclaimer
Why meters per kg differ All 1.75 mm filaments have the same cross-section (2.405 mm²), so length per kg depends only on density. ABS (1.04 g/cm³) gives about 20% more meters than PLA (1.24 g/cm³) for the same weight.
3D printer fed with purple filamentPhoto: Jakub Żerdzicki / Unsplash
Frequently asked questions
Which filament gives the most meters per kg? ABS and ASA, at about 390–400 m per kg of 1.75 mm, because they are the least dense common filaments.
What temperature should I print PLA at? Usually 190–220 °C with a 50–60 °C bed. Start in the middle and tune with a temperature tower.
Open the full calculator: Filament Length to Weight Calculator →
✓ Reviewed on October 12, 2026 by the SizeBench team · a TAAP.DIGITAL project
The formulas and reference values on this page were checked against:
Filament manufacturer datasheets (density, diameter) Methodology and sources →